120W LED Gas Station Light

  • LED Canopy Light Front
  • https://sunvuv.com/wp-content/uploads/2016/07/LED-Canopy-Light-Back-Side.jpg
  • LED Canopy Light Project Case

12,000Lm 120W LED Gas Station Light Repleace 350W HPS...

  • S2U-CL-120
  • 100W led canopy light lamp
Share  Button

120W LED Gas Station Light

This manual contains important information. Please read before operating fixture.


  • Input Voltage: 90-305 VAC, 50/60 Hz

  • LED Light Source:Philips(LUXEON Rebel ) or LG

  • LED Power: 120W

  • System Power: 132W

  • LLED Qty: 60 pcs

  • LED Luminous Efficiency: 120-130 lm /W

  • LED Initial Luminous Flux: 12,000 Lm

  • Beam Angle: 60x60deg or 90x90deg

  • Color Temp.: 4000K-7000K

  • Illuminance Design: LED+Lens

  • LED Junction Temperature: ≤70℃(@ Ta=25℃)

  • Lamp Life: >50000H

  • Operating Temp.:-40℃~ 45℃

  • IP-protection: IP65

  • Power Cord: 0.75mm2 triple shield wire

  • N.W.:8.5 kg; G.W.:10.0 kg

  • Packing size:47*47*23cm


  • 6063 Aluminium material for the lamp house

  • Advanced and high-efficient Copper and Aluminum composite phase change heat dissipation technology

  • Oxidation for the surface of lamp’s shell

  • With PMMA lens–60°or 90°beam angles

  • 120-130lm/W high power light source of Philips or LG’s chips

  • Meanwell class I waterproof & high-performance constant current power supply

  • Satisfaction guarantee, over 10 years at 16 hours per day

  • Certifications: CE、ROHS、UL (Power supply only)

  • 10sec 3000V high voltage test and 80℃ high temperature test

  • Energy savings, no UV and IR radiations, emits low heat

Installation Guide

How To Installation LED Gas Station Light

  • (1) Open a square hole on the ceiling, 360mm x 360mm

  • (2) Insert the mounting frame into the square opening

  • (3) Fix the mounting bracket to the frame

  • (4) Adjust the location of mounting bracket according to ceiling thickness

  • (5) Fix tight the four screws on the back side of mounting frame

  • (6) Insert the cable into the hole of mounting frame on the ceiling

  • (7) Make connection to the AC line voltage inside the ceiling

  • (8) Insert canopy light body into the ceiling hole

  • (9) Rotate the lamp body on the back side of ceiling, to fit with the mounting fixture

  • (10) Finally, fix tight the screws on the four corners. Installation completed




Your Name (required)

Your Email (required)


Your Message

WhatsApp chat